TDC1000-C2000EVM: Need Help getting LabView to interface with TDC1000 GUI for data collection

Ed Alexander

Part Number: TDC1000-C2000EVM
Other Parts Discussed in Thread: TDC1000,

Having trouble taking data from the TDC1000 GUI onto LabView. Can read the data fine from the TDC just fine, but now I need a way to take this Data to LabView for data manipulation. Does anyone know a way to do this?

over 8 years ago

0 Scott Cummins over 8 years ago

TI__Mastermind 31655 points

Hello,

Please refer to this thread, since I imagine you are working with Nicholas: e2e.ti.com/.../591825

In short, your question will likely be best answered by the experts in the C2000 forum here: e2e.ti.com/.../f

Regards,

0 Scott Cummins over 8 years ago in reply to Scott Cummins

TI__Mastermind 31655 points

Hi Ed,

I saw that you created another thread that looked to be meant for the C2000 forum, but it ended up here. When you enter the TDC1000-C2000EVM as the part number it will automatically post it to the ultrasonic forum. In order to post to the C2000 forum you will need to select the C2000 part number associated with the EVM: C2000-TMS320F28035PAG

I removed the thread from this forum. Please create a new thread with the C2000 part number mentioned above and it should post in the right place.

Regards,

Sensors

Sensors forum

TDC1000-C2000EVM: Need Help getting LabView to interface with TDC1000 GUI for data collection