Where can I buy EVM for mmWave Sensor Devices

Vaibhav Mahimkar

Mastermind 23725 points

Part Number: IWR1443
Other Parts Discussed in Thread: AWR1443,

Hello,

Here are are direct links to mmWave Sensor Device EVM and Booster pack board.

EVM Board links:

https://store.ti.com/IWR1443BOOST-IWR1443-Single-Chip-76-to-81GHz-mmWave-Sensor-Evaluation-Module-P52349.aspx

https://store.ti.com/IWR1642BOOST-IWR1642-Single-Chip-76-to-81GHz-mmWave-Sensor-Integrating-DSP-and-MCU-Evaluation-Module-P52350.aspx

https://store.ti.com/AWR1443BOOST-AWR1443-Single-Chip-76-to-81GHz-Automotive-Radar-Sensor-Evaluation-Module-P52346.aspx

https://store.ti.com/AWR1642BOOST-AWR1642-Single-Chip-76-to-81GHz-Automotive-Radar-Sensor-Integrating-DSP-and-MCU-Evaluation-Module-P52348.aspx

https://store.ti.com/AWR1243BOOST-AWR1243-76-to-81GHz-High-Performance-Automotive-Radar-Sensor-Evaluation-Module-P52345.aspx

Please note mmWave Development pack board needs one of the above EVM board to work with:

https://store.ti.com/MMWAVE-DEVPACK-mmWave-Development-Pack-DevPack-P52347.aspx

The 'BUY' button on individual product pages will be eventually redirected to one of the above links appropriately.

Thank you,

Vaibhav

over 8 years ago

Vaibhav Mahimkar over 8 years ago

TI__Mastermind 23725 points

This is an informative post.

Christophe Cloutier-Tremblay over 8 years ago

Intellectual 265 points

Hi Vaibhav,
Thank you for the following links.
The mmWave devpack confuses me, aren't the awr1443 sufficient to work with most TI's MCU ?
Thanks

Randy Rosales over 8 years ago in reply to Christophe Cloutier-Tremblay

TI__Mastermind 18500 points

Hi Christophe,

All of the XWRx are all designed around the MSP4x launchpad boosterpack footprint. The IWRx Boosterpack EVM can mate directly with the MSP4x launchpads.

However, to enable certain development modes, the separate mmWave devpack is required. Please see the mmWave devpack user guide for details. From the mmWave devpack Introduction chapter...

The MMWAVE-DEVPACK is an add-on board used with TIs mmwave sensor EVMs (1243BOOST, 1443BOOST, and 1642BOOST) to provide more interfaces and PC connectivity to the mmwave sensor EVM. It provides an interface for the Radar Studio tool to configure the Radar device and capture the raw ADC data using a capture card, such as the TSW1400.

Please let us know if this answers your question on this topic.

Jose Marcelino over 8 years ago

Intellectual 515 points

Sorry if this is the wrong place but are there any supply issues with the IWR1443BOOST? I ordered a few days ago and it's still "In Work at Fulfillment" with an estimated shipping date 08/30/2017. Is it really not shipping before end of August?

Just want to be able plan my coming work accordingly. Thank you in advance for any assistance.

Vaibhav Mahimkar over 8 years ago in reply to Jose Marcelino

TI__Mastermind 23725 points

Hi Jose,
It shouldn't be that long. Where are you trying to ship it to?

Regards,
Vaibhav

Jose Marcelino over 8 years ago in reply to Vaibhav Mahimkar

Intellectual 515 points

Thanks, just trying to have it shipped to me here in the UK.

Artem Aginskiy over 8 years ago in reply to Jose Marcelino

TI__Intellectual 1360 points

Hi Jose,

As Vaibhav mentioned we do have inventory and can ship sooner than August. Can you please send me an email with your sales/purchasing order number so I can look into this specific order? <edited>

Thanks,

--Artem

Sensors

Sensors forum

Where can I buy EVM for mmWave Sensor Devices