• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 680 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR1443: Data capture with TSW1400/mmWave Studio fails. No data captured.

Kevin Ortiz
Expert 3525 points
Part Number: IWR1443


Hi,

I followed the steps to collect data found in the following link: 

https://training.ti.com/search-catalog?keyword_op=AND&keywords=mmwave+tsw1400&start=&end=&=Apply

However, I am not able to capture any data. The console output window prints that no data was collected

  • 0
    TI__Expert 3525 points
    It is possible that the HSDCPro software times out and causes the data capture to fail. After clicking "TSW1400 ARM," the HSDCPro software goes through some operations to prepare for data capture. However, it occasionally takes too long, causing a time out. Instead of waiting, try clicking "Trigger Frame" right after clicking "TSW1400 ARM."