AWR1642: How to use DMM interface?

Hello Adam,
The DMM interface can be used to feed the digital data directly (bypassing the front end). One of the application of this could be like a "playback" of the ADC data to optimize the DSP algorithm. The user needs to the feed this data on the parallel DMM interface on the P4 and P5 connectors (CMOS level) . The details of the interface can be found in the AWR1642 Technical Reference Manual (www.ti.com/.../swru520.pdf) , section 2.3.7 and section 18.

Regards,
Vivek

Hello Adam,

       We would also plan to have an appnote on the HIL interface which would expalin the Programming model and the data flow by end of this month .

 regards

AK

Hello Vivek and Abdul,
Thanks for the reply. Will wait for the applicaiton notes for more details. I have another basic question about HIL. Which equipment we need to feed the test data into AWR1642 through HIL? Is there any example connection figure?

Thanks,
Adam

Hello Vivek and Abdul,
Could you help to look at my above question? Customer want to know what equipment or board they need to use HIL.

Thanks,
Adam

Hi,

My customer is also interested in HIL and wants to know how to use it. Would you pls help to provide a guide?

Thanks,

Hello Chris,
We are working on putting together the details on how to use the HIL interface. Will update once we have the app note ready.

Regards,
Vivek

Hello Chris,
I am closing this thread for now. Once we have the appnote available we will post a communication on this forum.
Regards,
Vivek

Hi Vivek,
Is the app notes for HIL already done?

Thanks,
Adam