AWR1243: MIPI CSI version issue

Eason Lu68

Part Number: AWR1243

Hi, TI guys

In AWR1243 datasheet, it's showed that AWR1243 supports MIPI CSI2 V1.1, but the MCU support MIPI CSI2 V1.01.00, can this be compatible?

over 8 years ago

0 Vivek Dham over 8 years ago

TI__Guru 58035 points

Hello Eason,
Does your MCU follow the CSI V1.0 standard? I did not find a CSI2 V1.01.00 standard on the MIPI website.

Regards,
Vivek

0 Vivek Dham over 8 years ago in reply to Vivek Dham

TI__Guru 58035 points

Hello Eason,
We are checking with the MIPI body if there is any change in the V1.1 which could make it incompatible with the V1.01.00 devices. We will get back to you once we have a clarification.

Regards,
Vivek

0 Vivek Dham over 8 years ago in reply to Vivek Dham

TI__Guru 58035 points

Hello Eason,
we have got the reply from the MIPI body and they confirmed a "MIPI CSI2 V1.01.00" receiver would be compatible with a "MIPI CSI2 V1.1" transmitter. So it should not be a problem.

Regards,
Vivek

Sensors

Sensors forum

AWR1243: MIPI CSI version issue