• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 532 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDC1000-TDC7200EVM: TDC1000-TDC7200EVM - SPI read out

Paulvannanayaki Marimuthu
Prodigy 40 points

Part Number: TDC1000-TDC7200EVM

We are developing a water flow rate sensor using TDC1000-TDC7200EVM. We wish to transmit the data wireless. 

Please guide us in reading the data out from the registers and transmitting to another micro controller.  We are in the starting stage of testing.

Do we need by any JTAG for MSP430 to read the data from the registers.

which wireless device we can buy, so that it can access the data from the EVM board?

thank you

  • 0
    TI__Mastermind 31655 points
    Hello,

    In the installation folder for the TDC1000-TDC7200EVM GUI you will find the full firmware source code for the onboard MSP430, as well as examples for SPI read/write and other operations. You do not need a JTAG programmer to talk to the MSP430. You can use the onboard USB connection, and follow the instructions in the EVM user's guide for firmware update.

    I can help with the TDC devices, but for assistance with wireless connectivity, please post a question to their forum here: e2e.ti.com/.../

    Regards,