• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 535 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1642BOOST: The merit to use TSW1400EVM for mmWave devices

Nomo
Guru 16800 points
Part Number: AWR1642BOOST

Hello,

Please let me know the merit to use TSW1400EVM to capture ADC data of mmWave devices.
I think "Streaming over LVDS" of "capture" demo in mmwave_sdk with MMWAVE-DEVKIT output almost the same results.

Best Regards,

Nomo

  • 0
    TI__Guru 58035 points
    Hello Nomo,
    TSW1400 is just one example platform to capture the ADC data sent from the AWR device over the LVDS interface.You could use any some other platform as well.
    The streaming over LVDS in the capture demo enables the LVDS transmission from the AWR device, but you also need some LVDS receiver on the other side to capture it. Thats where the TSW1400 board comes in handy.

    Regards,
    Vivek