Assistance in connecting LMT01 and TMP107 to raspberry pi 3

Srijith Rajeev

Other Parts Discussed in Thread: LMT01, TMP107, BOOSTXL-TMP107

Hi,

I am trying to use a series of temperature sensors (either LMT01(4) or TMP107(4)) connected to a raspberry pi to measure temperature in series (possibly using a multiplexer). I did a search a lot online but I did not find literature with raspberry pi and these sensors. I was hoping the members of the community can guide me to the right documents/tutorials.

Best,

Srijith

over 8 years ago

0 Aaron Heng over 8 years ago

TI__Mastermind 36940 points

Hi Srijith,

Unfortunately, we do not have example source code reading the temperature LMT01 and TMP107 using raspberry pi. We only developed the code in MSP430. If you are interested, please let me know. Maybe you can use this and convert to raspberry pi.

Aaron

0 Srijith Rajeev over 8 years ago in reply to Aaron Heng

Prodigy 30 points

Hi Aaron.
Sure, I can give that a try. Thank you.
Best,
Srijith

0 Ren Schackmann over 8 years ago in reply to Srijith Rajeev

TI__Mastermind 43715 points

Hi Srijith,

MSP430 code for TMP107 is available on the BOOSTXL-TMP107 landing page. This hardware is still unreleased, but the documentation and source code are live on the web. See www.ti.com/.../BOOSTXL-TMP107

Ren

0 Aaron Heng over 8 years ago

TI__Mastermind 36940 points

Hi Srijith,

Below is the link to the LMT01 folder. If you scoll down at the bottom of the page, you can download the software GUI. The example code should be in the TI LMT01 firmware folder that's part of GUI install.

Hope this helps. Let me know if you have further question.

Aaron

Sensors

Sensors forum

Assistance in connecting LMT01 and TMP107 to raspberry pi 3