LDC2114EVM: Not able to upload Firmware of the LDC2114EVM with the Sensing Solution EVM GUI

Marcel Kaufmann

Prodigy 170 points

Part Number: LDC2114EVM

Hello,

I wanted to update the Firmware of my LDC2114EVM with the "Sensing Solution EVM GUI v1.9.2".

Every time i try to upload the txt-File, i get this Error:

Then, I´m not able to reconnect the EVM, except I restart my PC or change the USB-Port.

Is this an known issue?

And is there maybe another way to get the new Firmware in my EVM?

Thank you and
Kind Regrads,

Marcel

over 7 years ago

0 Luke LaPointe over 7 years ago

TI__Genius 13335 points

Hello Marcel,
If you have loaded the wrong firmware or corrupted the firmware on the MSP430 then the GUI will not recognize the device connected. I would recommend putting the device into BSL mode and uploading the firmware that way. Please refer to the following E2E thread where we've posted the solution to this problem: e2e.ti.com/.../2095775
Regards,
Luke LaPointe

0 Marcel Kaufmann over 7 years ago in reply to Luke LaPointe

Prodigy 170 points

Hello Luke,

After putting the MSP430 in BSL - Mode, the firmeware-update worked perfectly.

Thanks for your support!

Regards,
Marcel

0 Luke LaPointe over 7 years ago in reply to Marcel Kaufmann

TI__Genius 13335 points

Hi Marcel,
Thanks for confirming the solution to your issue. Glad to hear things are working ok.
Regards,
Luke

Sensors

Sensors forum

LDC2114EVM: Not able to upload Firmware of the LDC2114EVM with the Sensing Solution EVM GUI