Compiler/OPT8241: Modulation Frequency Program and Measure

ShengHua Yang

Part Number: OPT8241

Tool/software: TI C/C++ Compiler

Hi All:

We are working at TOF project based on OPT8241 and Voxel SDK and hope to modify modulation frequency(mod_freq1 mod_freq2) then measure it .

The range of modulation frequency is from 10MHz to 100Mhz.

How can we change modulation frequency by Voxel SDK ? Is there a sample code to set modulation frequency?

How to measure the modulation frequency by scope meter or software method?

Best Regards,

Shenghua

over 7 years ago

0 Larry Li over 7 years ago

TI__Expert 3495 points

Example how to use:

github.com/.../CLIManager.cpp

Replace 'token' with string 'mod_freq1' or "mod_freq2'

-Larry

0 Larry Li over 7 years ago in reply to Larry Li

TI__Expert 3495 points

Also you can set 'mod_freq1' and 'mod_freq2' directly in the *.conf file.

See github.com/.../Configuration-Files

If you set 'unambiguous range', you should not set modulation frequencies because they are calculated for you.

0 ShengHua Yang over 7 years ago in reply to Larry Li

Intellectual 690 points

Dear Larry:

Thanks you a lot.

Best Regards,
ShengHua

Sensors

Sensors forum

Compiler/OPT8241: Modulation Frequency Program and Measure