• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 568 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1443BOOST: Programming

Yunish Shrestha
Prodigy 230 points
Part Number: AWR1443BOOST
Other Parts Discussed in Thread: AWR1443

Hi,

I am new to AWR 1443 boost. I am able to use it using mmWave Demo Visualizer. I want to know if it is possible to use it by using program codes? Also, how to get the raw data? I read the documentation of mmwave SDK but didn't find my answer.

Thank You

  • 0
    TI__Mastermind 22155 points

    Hello Yunish,

    You can capture the raw data over LVDS interface using a TSW1400EVM and then do the data processing on the raw data.

    Please look at the below training  on  how to setup the TSW1400EVM and the AWR1443 to capture the data

    mmwave-sensor-raw-data-capture-using-tsw1400-board

    Thanks,

    Raghu

    ---------------------------------------------------------------------------------------------------------

    Please click the Verify Answer button on this post if it answers your question.

    ----------------------------------------------------------------------------------------------------------