• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 773 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM95234: Asking for the LM95234 layout GND design review

SHH
Mastermind 32186 points
Part Number: LM95234

Hi Team,
Could you please help preview the LM95234 layout and customer question in attached word file?

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/1023/LM95234-layout-review_5F00_password_5F00_ti_5F00_.7z

Thanks,
SHH

  • 0
    TI__Expert 5695 points
    TI Support team will will review your layout and will provide recommendations in the next 24 hrs.
  • 0
    TI__Mastermind 43805 points
    Is the customer's goal to measure ambient air temperature using the local channel? The copper material removed beneath the device will help to some degree. There's no need to connect two traces to the thermal pad beneath the device. It shouldn't be necessary to electrically connect this pad at all, but I'm having trouble getting confirmation on that.

    We recommend smaller local-only temperature sensors with additional PCB isolation for ambient air measurements. See www.ti.com/.../snoa967 and www.ti.com/.../snoa966

    I would like to see additional pictures of the remote channels. We often see customer issues with noise coupling into the remote channel traces. Generally, these issues can only be solved with better layout technique and shielding.

    Ren