AWR1243: Alternate Flash Chip?

Fabian Schwartau

Part Number: AWR1243

Hello everyone,

is there somewhere a list of campatible flash chips for the AWR1243? In the reference design an S25FL116K0XNFV010 is used but this part is obsolete (and out of stock everywhere) and I cannot find a list of compatible parts or requirements the chip needs to fulfill.

Best Regards,

Fabian

over 7 years ago

0 Akash Gondalia over 7 years ago

TI__Guru 50240 points

Hi Fabian,

Thank you for pointing this out. I will have to talk to my team and get back to you.

Cheers,
Akash

0 Akash Gondalia over 7 years ago

TI__Guru 50240 points

Hi Fabian,

The S25FL116K0XNFV010 is a 2 MB, SPI Flash Memory rated for 3.0 Volts. Any suitable flash memory part that meets the same specs will be appropriate.

Cheers,
Akash

0 Jesse Wang over 7 years ago in reply to Akash Gondalia

TI__Intellectual 2285 points

Follow this question, is there any other SPEC requirement for the SPI flash except 3.0V?
If I don't use Cypress, but other vendor like GigaDevice's GD25Q32C. Is this flash ok?

0 Akash Gondalia over 7 years ago in reply to Jesse Wang

TI__Guru 50240 points

Jesse,

This is a very good question, I'm going to get in touch with one of our experts on board design and I'll get back to you. I'll make sure you're CC'd on that email.

Cheers,
Akash

0 Fabian Schwartau over 7 years ago in reply to Akash Gondalia

Intellectual 270 points

Can you please keep me in the loop?

I tried the SST26VF016B-104I/SN but it did not work - no idea why.

0 Akash Gondalia over 7 years ago in reply to Fabian Schwartau

TI__Guru 50240 points

Hello Fabian,

The AWR1243/XWR1443 devices have only been tested with Spansion and Macronix devices. The flash variants that have been tested are as follows:
Spansion S25FL256S
Spansion S25FL132K0XNFB010
Macronix MX25L3233F
Macronix MX25R1635FZNIH0 (Wide voltage part variant)

Cheers,
Akash

Sensors

Sensors forum

AWR1243: Alternate Flash Chip?