How to calculate RCS？

w20ss11

Other Parts Discussed in Thread: AWR1642

Hello,

Through the EVM AWR1642, MMWAVE-DEVPACK,TSW1400, I get the raw ADC data. But how can I measure RCS of a target using the mmwave devices?

I can only get the intermediate-frequency signal. How can I know the amplitude of transmitted signal and received signal.I see this formula in TI training video.Is it right to think in this way that When Pt is constant, Power captured at RX is proportional to σ/d^4?

over 7 years ago

0 Akash Gondalia over 7 years ago

TI__Guru 50240 points

Hello,
I've referred your RCS question to a mmWave Team member. Someone should be with you shortly.

Cheers,
Akash

0 Sandeep Rao30 over 7 years ago

TI__Prodigy 565 points

Hi,
You are right. When other things are constant, the received power is proportional to sigma/d^4. One way to compute the RCS of a target is to use the following equation (from module-4 of the training videos), which relates the measured SNR to the RCS of the object.

Sandeep

0 Sandeep Rao30 over 7 years ago in reply to Sandeep Rao30

TI__Prodigy 565 points

When calculating the SNR , the noise level that you use should be the thermal noise induced noise floor (and not the noise due to clutter).
A convenient way to do this is to have a stationary scenario and use the signal level in the non-zero doppler bins as a measure of the noise floor.

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Sensors

Sensors forum

How to calculate RCS？