FDC2214EVM: Integration Board Design In Need of Schematic/Solid Component Files

JWAN

Part Number: FDC2214EVM
Other Parts Discussed in Thread: LDC1614, FDC2214, , LDC1614EVM

I am using Altium / SolidWorks PCB to design a displacement measuring system by integrating your 4-channel capacitive sensing module. Can you please provide me the schematic component and solid model files of FDC2214 and LDC1614? It would be even nice if you can provide the entire component library. Thank you very much!

over 8 years ago

0 Chris Oberhauser66 over 8 years ago

TI__Genius 14270 points

Hello Jwan,

The Altium design files for the FDC2214EVM are located at www.ti.com/.../snor022 and the LDC1614EVM Altium design files are located at www.ti.com/.../snor017.

Regards,

ChrisO

0 JWAN over 8 years ago in reply to Chris Oberhauser66

Prodigy 60 points

Thank you very much. Can you also provide the CAD models for them?

0 Chris Oberhauser66 over 8 years ago in reply to JWAN

TI__Genius 14270 points

Hi Jwan,

If you have Alitum, with the project files you can generate the Gerbers, ODB++, or Step files directly. Do you have Altium?

Regards,

ChrisO

0 JWAN over 8 years ago in reply to Chris Oberhauser66

Prodigy 60 points

Hi Chris,

I am using an Add-On for SolidWorks developed by Altium, called SolidWorks PCB. I can open the schematic files but not the project files.

Thanks!

0 Chris Oberhauser66 over 8 years ago in reply to JWAN

TI__Genius 14270 points

Hi Jwan,

You can get a step file of the FDC2214 or LDC1614 in the RGH package (QFN 16 pin) from https://webench.ti.com/cad/dlbxl.cgi/newstep/RGH0016A.stp.

The STEP file for the populated Rev B LDC1614EVM is: https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/1023/SV601147B_2800_001_2900_.step

Regards,

ChrisO

0 JWAN over 8 years ago in reply to Chris Oberhauser66

Prodigy 60 points

Thanks. That's what I need!

Sensors

Sensors forum

FDC2214EVM: Integration Board Design In Need of Schematic/Solid Component Files