AWR1642BOOST: Power supply unavailability at j7 and j4

Madan K Avhad

Part Number: AWR1642BOOST
Other Parts Discussed in Thread: AWR1642,

Hi,

I looking to use +5/+3 v from J4 and J7 port, but power not available in that. Is there any way to get up power in the respective connector Port.

Thanks

Madan

over 7 years ago

0 Vivek Dham over 7 years ago

TI__Guru 58035 points

Hello Madan,
Are you looking at taking the 5V/3.3V from the AWR1642 EVM to another board over the J4/J7 connectors? You could bring that by mounted couple of resisters : R115 and R130. You can refer to the schematics and assembly pdfs available on the AWR1642BOOST page to know the exact location of these resisters.

Regards,
Vivek

0 Madan K Avhad over 7 years ago in reply to Vivek Dham

Expert 1260 points

Thanks Vivek!!!

Sensors

Sensors forum

AWR1642BOOST: Power supply unavailability at j7 and j4