• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 463 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1642: Data format differences b/w SDK1.0 and SDK1.1

Akihiko Fujinaka
Expert 3455 points
Part Number: AWR1642
Other Parts Discussed in Thread: MMWAVE-SDK

Hello Team,

Are there any differences of the data format of the data streamed out on virtual UART between SDK1.0 and SDK1.1?

I read each document but can not understand the differences well.

Thanks in advance.

Best Regards,

Akihiko Fujinaka

  • 0
    TI__Mastermind 22155 points
    Hello Fujinaka-san,
    There are no changes in the output data that is streamed out on the UART between the SDK 1.0 and SDK 1.1.

    You can compare the file "MMWAVE-SDK\packages\ti\demo\io_interface\mmw_output.h" between the SDK . You will not see any difference in the output message except for the subframe number addition to support the advanced frame config.

    Thanks,
    Raghu