• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 432 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH® Tools/AWR1243BOOST: Before AWR1243BOOST to work，do you need to flashing?

user1251954
Prodigy 90 points
Part Number: AWR1243BOOST
Other Parts Discussed in Thread: UNIFLASH

Tool/software: WEBENCH® Design Tools

Hello!

Before AWR1243BOOST to work，do you need to flashing?

  • 0
    TI__Mastermind 22155 points
    Hello ,

    The question is not quite clear , but I am hoping your question is regarding the flashing of device firmware to AWR1243BOOST.

    You can flash the AWR1243BOOST using the UNIFLASH with the MSS, RADARSS and xwr12xx_memswap.bin that is available in the MMWAVE-DEVPACK. Then you can configure the AWR1243BOOST "SOP: Functional mode" using the RadarStudio.

    Let me know if this is what you wanted to know.

    Thanks,
    Raghu