• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 522 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1642BOOST: Radar Studio config for 2 Tx

Suraj Gaonkar
Intellectual 330 points
Part Number: AWR1642BOOST
Other Parts Discussed in Thread: AWR1642

hi,

I am using AWR1642  with data capture board  and my config is set as below in RADAR studio.

4 Rx

2 Tx

1 frame

32 chirps

what will the data format of .bin file be??

will it be 16 chirps for each Tx??

is it possible to set Tx1 and Tx2 data simultaneously ??

how do we set the BPM chirp config ??

  • 0
    TI__Mastermind 22155 points

    Hello Suraj,

    I am assuming that you are using the TSW1400EVM for capturing the data over LVDS.

    The following app note captures the LVDS data format coming out on the LVDS lanes: 

    Please see the below post for understanding how to set the BPM chirp configuration.

     

    Thanks,

    Raghu