AWR1443BOOST: Application and Interface with external software applications

rahul mishra83

Part Number: AWR1443BOOST
Other Parts Discussed in Thread: AWR1443, AWR1642

Hi,

I currently have a AWR1443 EVM. I want to use it in a project wherein I have to keep an account on number of people. So it is possible implementing it with this EVM ? If yes, how?

Also, I want to interface it with an external micro-controller, say, nrf51 or frdm. So, please let me know if there is any way out.

Thanks in advance.

Regards,

Rahul

over 7 years ago

0 Akash Gondalia over 7 years ago

TI__Guru 50240 points

Hello Rahul,

It is possible but it is much better suited for AWR1642 due to integrated DSP. We will actually have a Lab on this sometime in January for AWR1642 so keep an eye out for that.

As far as interfacing with an external MCU, I'd recommend looking at this TI Design: www.ti.com/.../TIDEP-0091

Cheers,
Akash

0 rahul mishra83 over 7 years ago in reply to Akash Gondalia

Prodigy 20 points

Hi,

I've connected a USB to UART convertor directly on pins 6(Tx) and 8(Rx) of the EVM and I tried to read the data on the terminal window but it didn't showed anything. So, Is it supposed to show anything?
I'm running the inbuilt demo code via mmwave Demo Visualizer.

Sensors

Sensors forum

AWR1443BOOST: Application and Interface with external software applications