IWR1443: Design files in Altium format

Anto Y

Part Number: IWR1443

Hi,

Is Design Files of IWR1443BOOST ( www.ti.com/.../sprr254 and www.ti.com/.../sprr253 ) available in Altium format? Thank you

Regards,
Anto

over 7 years ago

0 Akash Gondalia over 7 years ago

TI__Guru 50240 points

Hi Anto,

I am not so sure about this but I will talk to our expert on board design and have an answer for you in the next couple of days.

Cheers,
Akash

0 Akash Gondalia over 7 years ago

TI__Guru 50240 points

Hello Anto,

I'm sorry but we only offer the Design files listed on the IWR1443BOOST page.

Cheers,
Akash

0 Shaka Lee over 7 years ago in reply to Akash Gondalia

Intellectual 835 points

Hello Akash,

I hope to convert the schematic of IWR1443BOOST to Altium format.
Please let me know what CAD program and version information did you use for schematic. It would be helpful if you can guide how to convert the schematic to Altium format.

I downloaded sprr253.zip(IWR1443BOOST Layout and Design Files) file and found Database.7z file. I think it's the schematic designed using Allgro, but It says 'The database.7z is a zip file with the schematic design database. This can be viewed using Candence ADW' in Readme file.

Best regards,
Shaka

0 aozer over 7 years ago in reply to Shaka Lee

TI__Mastermind 30545 points

Hello Shaka,

The design was done using Allegro PCB Designer.

There are ways to convert from Allegro PCB to Altium but I have never tried them. Maybe try looking at this for a starting point:

Regards,

Adrian

Sensors

Sensors forum

IWR1443: Design files in Altium format