Compiler/AWR1642: CCS project supports QSPI flash writer on AWR1642

Omin Chou

Genius 3555 points

Part Number: AWR1642
Other Parts Discussed in Thread: UNIFLASH, MMWAVE-SDK

Tool/software: TI C/C++ Compiler

Hi all,

Does TI have plan to support QSPI flash writer on CCS project instead of UniFlash?

We would like to do firmware upgrade via UART/SPI/CAN etc.

Thanks in advance.

B.R.

over 7 years ago

0 Akash Gondalia over 7 years ago

TI__Guru 50240 points

Hi Omin,

I don't believe TI has any plans to support this at this time although I will have to confirm with a team member to be sure.

Cheers,
Akash

0 Cesar over 7 years ago

TI__Guru*** 148334 points

Hi,

Could you please provide more details about how you plan to perform the firmware upgrade?

Is there a host processor that will send the firmware?

Thank you
Cesar

0 Omin Chou over 7 years ago in reply to Cesar

Genius 3555 points

Hi Cesar,

Thanks for your reply.

Here is the data flow. Please let me know TI will add this use case in SDK_1.2 or not.

B.R.

0 Raghunandan Kamath over 7 years ago in reply to Omin Chou

TI__Mastermind 22155 points

Hello OC ,

There is a plan to add such a usecase in the future releases if the MMWAVE-SDK or as TIREX .

Thanks,
Raghu

0 Omin Chou over 7 years ago in reply to Raghunandan Kamath

Genius 3555 points

Hi Raghu,

Thanks for your prompt reply.
May I know the roughly schedule? e/o Q1 or Q2?

B.R.
OC

0 Raghunandan Kamath over 7 years ago in reply to Omin Chou

TI__Mastermind 22155 points

Hello OC,
It should be around Q2.

-Raghu

0 Omin Chou over 7 years ago in reply to Raghunandan Kamath

Genius 3555 points

Hi Raghu,

Noted.
Thanks so much for your confirmation.

B.R.
OC

Sensors

Sensors forum

Compiler/AWR1642: CCS project supports QSPI flash writer on AWR1642