• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 555 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1642: Can BPM configuration be changed while radar sensor in the 'started' state?

Xinsi lin
Intellectual 530 points

Part Number: AWR1642

Hi,

would it be possible to  change BPM configuration while sensor being started using mmwavelink API?

Best Regards,

Xinsi Lin

  • 0
    TI__Guru**** 153444 points
    Hi,

    The AWR1xx_Radar_Interface_Control.pdf provided with the dfp release provides a list of the parameters than can be dynamically set.
    See Section 5.4 "Sub blocks related to AWR_RF_DYNAMIC_CONF_SET_SB"

    BPM is not one of the features that can be set dynamically

    Thank you
    Cesar