AFE5809EVM: Generating a Ramp test pattern from AFE5809 EVM

BCS Rohith

Part Number: AFE5809EVM
Other Parts Discussed in Thread: AFE5809,

I am using a AFE5809 EVM and would like to test a program for deserialising the output LVDS signal using an FPGA. For this i would like to test with using a RAMP signal which can be generated from the AFE, Can anyone describe the step by step procedure of how to accomplish this task.

over 7 years ago

0 Praveen Aroul over 7 years ago

TI__Mastermind 49926 points

Hello Rohith,

Are you able to configure the AFE5809 using the AFE5809 GUI in ramp test pattern mode and capture the waveform in the HSDC Pro GUI with the AFE5809EVM and the TSW1400EVM?

0 BCS Rohith over 7 years ago in reply to Praveen Aroul

Prodigy 155 points

@praveen Hi... I want to know is there any reference manual to setup the AFE5809 and its GUI to get the ramp test pattern waveform.

0 Praveen Aroul over 7 years ago in reply to BCS Rohith

TI__Mastermind 49926 points

Rohith,

Have you referred to section 8.1 in the AFE5809EVM users guide (www.ti.com/.../slou338a.pdf) for the ramp test pattern?

Sensors

Sensors forum

AFE5809EVM: Generating a Ramp test pattern from AFE5809 EVM