AWR1642BOOST: how do i program AWR1642BOOST EVM

Rahul Kumar85

Part Number: AWR1642BOOST
Other Parts Discussed in Thread: AWR1642

Can i upload my own modified algorithims on the dsp of the EVM or do i have to use an external processor for it?

Also as i cannot find any CCS Project demo in mmwave sdk for the same, i'm not able to figure out which IDE i can use to programme AWR1642BOOST. Please guide me through.

Thanks

over 7 years ago

0 Cesar over 7 years ago

TI__Guru*** 148994 points

Hi,

CCS IDE should be used to develop code on the AWR1642.

You can find the CCS project for the mmwave sdk in the mmwave industrial toolbox available on the TI Resource Explorer

dev.ti.com/.../

Thank you
Cesar

0 Rahul Kumar85 over 7 years ago in reply to Cesar

Intellectual 890 points

In Industrials toolbox all the demos are either for IWR series i.e. industrial or robotics applications, i want demo for automotive application for autonomous driving. In automotive toolbox there is just one demo and that to in-vehicle driver monitering. Kindly help me with the same.

0 Cesar over 7 years ago in reply to Rahul Kumar85

TI__Guru*** 148994 points

Hi,

For automotive applications we have several TI Designs and Demos available.

What specific application are you interested in?

Thank you
Cesar

0 Cesar over 7 years ago in reply to Cesar

TI__Guru*** 148994 points

Hi,

It seems that you have started another thread that covers the same questions

Let's close this thread and continue discussions in the other thread

e2e.ti.com/.../673437

Thank you
Cesar

Sensors

Sensors forum

AWR1642BOOST: how do i program AWR1642BOOST EVM