IWR1443BOOST: can I get IQ signal from IWR1443BOOST directly?

Okayama Gou

Part Number: IWR1443BOOST
Other Parts Discussed in Thread: IWR1443

On behalf of customer:

Do we have any way to get IQ signal from IWR1443BOOST directly?

Now my customer evaluate IWR1443 with 3 EVMs: IWR1443BOOST + MMWAVE-DEVPACK + TSW1400EVM

Also because of their application, they should put those 3 EMVs in case. But there are some reason, the customer want to put IWR1443BOOST only in case.

Best regards,
Gou

over 7 years ago

0 Justin Curewitz over 7 years ago

TI__Mastermind 28055 points

Hi Okayama,

Unfortunately, there is not currently an automated solution for this. However, you can manually capture data with CCS. You will have to run the capture demo found at <mmwave_sdk_01_02_00_05\packages\ti\drivers\test\mem_capture\xwr14xx> The process to capture the memory data is explained in this document.6708.ADC Data Capture SDK1.05 V1.00.pdf

Regards,

Justin

Sensors

Sensors forum

IWR1443BOOST: can I get IQ signal from IWR1443BOOST directly?