IWR1642BOOST: TSW14J56EVM instead of TSW1400 for high speed data capture?

John Hofmeister

Part Number: IWR1642BOOST

Hello,

I recently purchased the TSW14J56EVM instead of the TSW1400 so that I could setup high speed data capture from my IWR1642Boost. Will the TSW14J56EVM work with the mmWave DevPack and the IWR1642Boost? Or do I need to go back and purchase the TSW1400?

Thank you,

John H.

over 7 years ago

0 Akash Gondalia over 7 years ago

TI__Guru 50240 points

Hi John,

No one has ever asked this question before. We advocate use of the TSW1400EVM, as that is what we have collateral for, although I will have to ask about compatibility and get back to you.

Cheers,
Akash

0 Justin Curewitz over 7 years ago in reply to Akash Gondalia

TI__Mastermind 28055 points

Hi John,

The High Speed Data Capture Pro software does not support mmWave device capture with any ADC besides the TSW1400. You will have to use the TSW1400 to capture raw data.

Regards,
Justin

0 Justin Curewitz over 7 years ago in reply to Justin Curewitz

TI__Mastermind 28055 points

Hi John,

Did this resolve your question?

Regards,
Justin

0 John Hofmeister over 7 years ago in reply to Justin Curewitz

Prodigy 150 points

Yes. Thank you!

Sensors

Sensors forum

IWR1642BOOST: TSW14J56EVM instead of TSW1400 for high speed data capture?