IWR1443: IWR1443

Siddharth Viswanathan29

Part Number: IWR1443

Hi,

I have an issue where my sensor board isn't responding to the visualizer "RViz". It returns error "sensor did not responded with Done".

Could somebody help with this. I have installed everything right and also successfully reflashed my board.

Thanks,

Siddharth

over 7 years ago

0 Akash Gondalia over 7 years ago

TI__Guru 50240 points

Hi Siddharth,

Would you be able to post some screenshots of this error? It is unclear what you are asking and we need more information in order to assist you.

Cheers,
Akash

0 Siddharth Viswanathan29 over 7 years ago

Prodigy 70 points

I have attached the picture of the3 error that the board is throwing up.

0 Siddharth Viswanathan29 over 7 years ago in reply to Akash Gondalia

Prodigy 70 points

Hi Akash,

I just posted the picture of the error. Hope it helps.

0 Nitin Sakhuja over 7 years ago in reply to Siddharth Viswanathan29

TI__Mastermind 30405 points

Hi Siddharth,

From the output above, it looks like your mmWave EVM has the "Capture Demo" flashed onto it. Please note that you need to flash the mmw Out-of-box demo on the EVM as per the instructions provided in the ROS Point Cloud Visualizer Lab user guide under "Running the driver" section.

Thanks

-Nitin

Sensors

Sensors forum

IWR1443: IWR1443