AWR1642: The radar detection range depth and width max at 11.16 and 5.58 meters and can not increase for my demo board?

Steven Cong

Part Number: AWR1642

Dear Sir/Ms:

Regarding to my demo board, I have range depth and width width max at 11.16 and 5.58 meters, if I input bigger than these ,it will con=me back automatically, does this make sense?

Thank you !

steven.

over 7 years ago

0 Cesar over 7 years ago

TI__Guru*** 149044 points

Hi,

If I understand correctly you are using the AWr1642BOOST EVM. Is this correct?

What application are you running?

Thank you
Cesar

0 Steven Cong over 7 years ago in reply to Cesar

Prodigy 165 points

Yes, AWR1642boost EVM, just try to evaluate the board's performance for the vehicle detection, 11meter is not far enough, as I know it should go 80 meters based on your instruction

0 Cesar over 7 years ago in reply to Steven Cong

TI__Guru*** 149044 points

Please download the Automotive Toolbox from the TI Resource Explorer.

dev.ti.com/.../

Please run the SRR lab provided in the toolbox.

Using this lab you should be able to see the 80m performance.

Associated TI Design is (you may have already read it)

www.ti.com/.../TIDEP-0092

Thank you
Cesar

0 Steven Cong over 7 years ago in reply to Cesar

Prodigy 165 points

Thank you !

Steven

Sensors

Sensors forum

AWR1642: The radar detection range depth and width max at 11.16 and 5.58 meters and can not increase for my demo board?