• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 30 subscribers
  • Views 620 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMP116EVM: about the GUI for TMP116

TMP116EVM: about the GUI for TMP116

user5190379
Prodigy 10 points
Part Number: TMP116EVM

Hi team,

TMP116EVM GUI doesn't start correctly. I tries on two Windows10 PC and two set of TMP116EVM. When I unchecked Demo Mode checkbox, always popup saying " Interface not initialized". GUI installation with NI run-time should be correct.

Could you please advice how to correctly set up TMP116EVM?

Also TMP116EVM Orage LED is alway's on. Is this working good?

Appreciate your support.

Regards,

  • 0
    TI__Mastermind 31760 points

    Hi user,

    The message indicated that your computer wasn't recognized the EVM. When you first plugged the TMP116EVM into your computer, did you see a Windows popup message at the bottom right corner with "Device driver is installed sucessfully"? You can also check by going into the device manager as shown in the red rectangular box. Or you can also try different USB port.



    Hope this helps. Let me know if you have further questions.

    Aaron

  • 0 in reply to Aaron Heng
    TI__Mastermind 31760 points
    Hi Yoshihiko-san,

    I want to check back with you if you were able to resolve the issue based on my inputs. Please let me know if you still need my help.

    Aaron