IWR1443: Location of the datasheet

HARSHA VARDHANA JETTI

Part Number: IWR1443

Hi,

In the SDK userguide, the supported values for a lot of parameters has been said to be found in the mmwavelink doxygen/device datasheet. But, I can not find this file in my computer. Could you tell me the exact location of the file?

Thanks and Regards,

Harsha.

over 7 years ago

0 Akash Gondalia over 7 years ago

TI__Guru 50240 points

Hello Harsha,

The doxygen is located at the following location in your SDK: C:\ti\mmwave_sdk_01_02_00_05\packages\ti\demo\xwr14xx\mmw\docs\doxygen\html\index.html

Cheers,
Akash

0 HARSHA VARDHANA JETTI over 7 years ago in reply to Akash Gondalia

Prodigy 100 points

Hello,

Then, where are the supported values for each parameter as given in the SDK user guide? I can't find them in the index document.

Thanks,
Harsha.

0 Akash Gondalia over 7 years ago in reply to HARSHA VARDHANA JETTI

TI__Guru 50240 points

Hi Harsha,

These parameters are on page 14 of the SDK User Guide.

Cheers,
Akash

0 HARSHA VARDHANA JETTI over 7 years ago in reply to Akash Gondalia

Prodigy 100 points

Hi,

The parameter definitions are given in the SDK guide but what about the values? For example, the parameter ADC sampling frequency in profileCfg section? There are no values specified. It says, any value as per mmwavelink doxygen/device datasheet.

Thanks,
Harsha.

0 Akash Gondalia over 7 years ago in reply to HARSHA VARDHANA JETTI

TI__Guru 50240 points

Hi Harsha,

These are all part of CLI commands and you can find more about them in the Doxygen here: C:/ti/mmwave_sdk_01_02_00_05/packages/ti/demo/xwr14xx/mmw/docs/doxygen/html/mmw__cli_8c.html

Furthermore, for more example configurations I'd invite you to look at the Chirp Database on the Resource Explorer: dev.ti.com/.../

Cheers,
Akash

Sensors

Sensors forum

IWR1443: Location of the datasheet