CCS/AWR1642BOOST: CCS / AWR1642BOOST： how to read the data output from the GUI of the diver vital signs project

user5319132

Part Number: AWR1642BOOST

Tool/software: Code Composer Studio

I found the project Diver vital signs demo and run on the AWR1642 successfully, but I have another question, how can I get the data i have saved in the .bin document, which soft should I use to read it.

over 7 years ago

0 Cesar over 7 years ago

TI__Guru*** 147994 points

Hi,

I am not clear which data you mention.

Can you please provide more details?

Thank you
Cesar

0 user5319132 over 7 years ago in reply to Cesar

Prodigy 100 points

I exported data from the GUI of Driver Vital Signs Demo Project

Like this:

I ticked the SACE DATA and export a .bin file.

But I can't read it. I don not know which software I should use to read it.

0 ahmed amine lamiri over 7 years ago in reply to user5319132

Expert 1095 points

I'm also facing the same problem ! I can't find where the data is stored (or not)!

0 Cesar over 7 years ago in reply to user5319132

TI__Guru*** 147994 points

Hi

The data is in binary format

thank you
Cesar

0 user5319132 over 7 years ago in reply to ahmed amine lamiri

Prodigy 100 points

you can find a file “dataOutputFromEVM.bin” in lab0001-driver-vital-signs\vitalSigns_host\gui\gui_exe

0 ahmed amine lamiri over 7 years ago in reply to user5319132

Expert 1095 points

thank you. Do you recommend any tool to process this file !!
Ahmed

0 Cesar over 7 years ago in reply to ahmed amine lamiri

TI__Guru*** 147994 points

Hi,

Please see

e2e.ti.com/.../702573

I will close this thread now

thank you
Cesar

Sensors

Sensors forum

CCS/AWR1642BOOST: CCS / AWR1642BOOST： how to read the data output from the GUI of the diver vital signs project