IWR1443: How to visualize or extract/use the data from a TSW1400 fed by an IWR1443 Boost SDK?

RandyP

Part Number: IWR1443

A customer has the IWR1443 boost sdk (software development kit) and a TSW1400 raw data capture board. The board works great as a radar system right out of the box. But, he does not have mmW test equipment and instead wants to characterize a mmW radar signal from the data on the TSW1400.

What options are there for reading, analyzing, and/or visualizing the data captured on the TSW1400?

Regards,
RandyP

over 7 years ago

0 Justin Curewitz over 7 years ago

TI__Mastermind 28055 points

Hi Randy,

Radar Studio, which is used to control the mmWave board when using the TSW1400, has a built in Post Processing tool that can be run after the raw data is collected. However, this tool has limitations as it can't be modified. We do not have any other software releases dedicated to processing raw data, but the data format is explained here if the customer wants to develop their own script.

Regards,

Justin

0 Justin Curewitz over 7 years ago in reply to Justin Curewitz

TI__Mastermind 28055 points

Hi RandyP,

Did this resolve your issue?

Regards,
Justin

Sensors

Sensors forum

IWR1443: How to visualize or extract/use the data from a TSW1400 fed by an IWR1443 Boost SDK?