RTOS/AWR1642: prune to peaks

ks prasad

Expert 1255 points

Part Number: AWR1642

Tool/software: TI-RTOS

Why pruning is necessary after CFAR algorithm . Cfar is also filtering noise an detecting peaks above threshold .

Thanks and regards

subrahmanyam

over 7 years ago

0 Akash Gondalia over 7 years ago

TI__Guru 50240 points

Hello Subrahmanyam,

This is a good question, I've asked our CFAR expert to look at this and someone should have an answer for you Monday.

Cheers,
Akash

0 Cesar over 7 years ago in reply to Akash Gondalia

TI__Guru*** 148974 points

Hi,

CFAR is not sufficient. This can be shown in simulation

Thank you
Cesar

0 ks prasad over 7 years ago in reply to Akash Gondalia

Expert 1255 points

Hi
Thank you
K Subrahmanyam

0 ks prasad over 7 years ago in reply to Cesar

Expert 1255 points

Hi
Thank you
K Subrahmanyam

Sensors

Sensors forum

RTOS/AWR1642: prune to peaks