AWR1443BOOST: AWR1443BOOST EVM is not powering up

Bhaskar Dutta

Part Number: AWR1443BOOST
Other Parts Discussed in Thread: IWR1443BOOST

AWR1443BOOST EVM is not powering up with 5V DC 3 A power supply. Only once it glow with both yellow led (ds4) and red led (ds2) just for few seconds and now its no more even glowing.

Please help anyone ASAP.

over 7 years ago

0 Cesar over 7 years ago

TI__Guru*** 147854 points

Hi,

So you were not able to run any software on the board?

Thank you
Cesar

0 Bhaskar Dutta over 7 years ago in reply to Cesar

Intellectual 335 points

The iwr1443boost is not even detected in Ubuntu / MacOS/windows.

0 Cesar over 7 years ago in reply to Bhaskar Dutta

TI__Guru*** 147854 points

Hi,

What do you mean by detected?

Under Windows, in order to see the COM ports in the Device manager, one needs to install the XDS Emulation package

Did you install the XDS Emulation package?

http://processors.wiki.ti.com/index.php/XDS_Emulation_Software_Package

Thank you

Cesar

0 Bhaskar Dutta over 7 years ago in reply to Cesar

Intellectual 335 points

The problem is that it's not powering up. Detection is of later concern once it gets powered up. Please help.

0 Cesar over 7 years ago in reply to Bhaskar Dutta

TI__Guru*** 147854 points

Hi,

If the board is not powering up, please return it

thank you
Cesaer

0 Bhaskar Dutta over 7 years ago in reply to Cesar

Intellectual 335 points

Can you help me know the procedure of return and refund/replacement ?

0 Bhaskar Dutta over 7 years ago in reply to Cesar

Intellectual 335 points

Hi Cesaer , awaiting you response. It will great also if you can direct me to the return and replace/refund group in TI ?

0 Cesar over 7 years ago in reply to Bhaskar Dutta

TI__Guru*** 147854 points

Please contact customer support center

www.ti.com/.../calltisupport.tsp

Thank you
Cesar

Sensors

Sensors forum

AWR1443BOOST: AWR1443BOOST EVM is not powering up