CCS/IWR1642BOOST: Determining EVM and Silicon Revision Number

John Condon55

Part Number: IWR1642BOOST

Tool/software: Code Composer Studio

How can you determine what revision of EVM (for the IWR1642BOOST Evaluation Module) and Silicon Revision Number (e.g. ES.1.0 vs ES1.0) do you have. I have not been able to find any markings on my board, IC, or documentation regarding this.

Thanks.

over 7 years ago

0 Cesar over 7 years ago

TI__Guru*** 149614 points

Hi

When did you purchase the EVM?

Usually the ES 2.0 silicon includes an "A" after the part number

thank you
Cesar

0 John Condon55 over 7 years ago in reply to Cesar

Prodigy 160 points

It was purchased in mid-march 2018 from TI's webstore. Is the "A" on the radar IC itself or is there any marking on the EVM PCB?

0 Akash Gondalia over 7 years ago in reply to John Condon55

TI__Guru 50240 points

The A is on the radar IC itself, there should be an ES 2.0 sticker on the EVM PCB.

Since you purchased in March, your EVM is ES1.0.

Cheers,
Akash

Sensors

Sensors forum

CCS/IWR1642BOOST: Determining EVM and Silicon Revision Number