• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 28 subscribers
  • Views 375 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1243: init sequence

Ilia K.
Prodigy 250 points
Part Number: AWR1243

Hi,

We are implementing our own host control for AWR1243. We'd like to know the exact sequence to perform on MCU/FTDI from AWR1243 power up until it's able to communicate via SPI (e.g. we can send  AWR_DEV_RFPOWERUP_MSG). What signals to set, what signal to sense from the MCU, and in what order?

Thanks.

  • 0
    TI__Guru*** 149044 points
    Hi,

    To understand the initialization sequence please see the mmwave link example.

    You will need only a SPI connection from Host to AWR1243

    The example is provided in

    C:\ti\mmwave_dfp_01_00_00_01\ti\example\mmwavelink_example

    What application do you intend to use the AWR1243 for?


    Thank you
    Cesar