Compiler/OPT8241: how to programme the TFC chip or opt9221 and opt8241,What's platform software can make programming on these chips?

Schellong pan

Part Number: OPT8241
Other Parts Discussed in Thread: OPT9221,

Tool/software: TI C/C++ Compiler

I have a OPT8241-CDK-EVM,but I dont know how to programme the TFC chip or opt9221 and opt8241,What's platform software can make programming on these chips?

do they have any tutorials I can read ? I want to programme chips in different situation or application ,which is I can modify the register and parameter of chips to achieve different funciton. it seem like to devolop ARM in KEIL software.

I would appraciate,if get reply .

over 7 years ago

0 Schellong pan over 7 years ago

Prodigy 220 points

by the way , coud please any professioner tell how to get raw date about depth date ?and what 's interface in board I can received?

0 Subhash Chandra Sadhu over 7 years ago in reply to Schellong pan

TI__Expert 3800 points

Hi!

Please refer to this TI Design for example applications to interface the chip with a Sitara ARM processor: www.ti.com/.../TIDA-01436
The board has a USB interface and you can use Voxel Viewer to capture and view the data.

Regards,
Subhash

0 Schellong pan over 7 years ago in reply to Subhash Chandra Sadhu

Prodigy 220 points

I wonder that what's the IDE can programme OPT8241 and OPT9221 ? THANK U FOR REPLY !

0 Suramya Gupta over 7 years ago in reply to Schellong pan

TI__Expert 3975 points

Hi,

We have an open-source software development kit for controlling 3DToF cameras. These can be used with ARM processors (tested with Raspberry pi). Here's the link:

If you mean, how to program the processor for communication, OPT8241-CDK-EVM uses FX2. The reference C code can be found here:

Suramya

Sensors

Sensors forum

Compiler/OPT8241: how to programme the TFC chip or opt9221 and opt8241,What's platform software can make programming on these chips?