• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 378 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TDC1000-TDC7200EVM: Using the BSL switch on the EVM board

Ramtin Massoumzadeh
Prodigy 110 points

Part Number: TDC1000-TDC7200EVM

Tool/software: Code Composer Studio

Is it possible to utilise the BSL switch on the board for other purposes than to flash the MSP430? I am thinking to sense if it is high or low to run custom code during runtime.

If so, what register should be read?

Thanks!

  • 0
    TI__Genius 11015 points
    Hello Ramtin,

    The BSL switch is not connect to any GPIO pin and it is connected only to the PUR pin. The PUR pin in the MSP430F5528 device is used to invoke the default USB BSL. So we cannot use this switch to any other purpose than to flash the MSP430.
    You can populate the J6 and access the GPIO s.