AWR1642: How much is the minimum RX Sensitivity?

user5579632

Prodigy 90 points

Part Number: AWR1642
Other Parts Discussed in Thread: , AWR1243

Hello

We were calculated the RX link budget to speculate the antenna gain, so we need the minimum rx sensitivity.

Do you provide the minimum rx sensitivity of AWR 1243, 1443 and 1642?

Many thanks.

BR, Karl

over 7 years ago

0 Cesar over 7 years ago

TI__Guru**** 150194 points

Hi,

We are checking with our antenna design team and will get back to you

thank you
Cesar

0 Vivek Dham over 7 years ago in reply to Cesar

TI__Guru 58035 points

Hello Karl,
From our device point of view we specify the noise figure of our recevier (data available in the datasheet). The exact sensitivity will depend on the detection algorithm used , chirp configuration used etc. , which would vary based on your implementation.
For a reference you can use the sensing estimation tool (dev.ti.com/.../) which allows you to estimate roughly the gains needed based on your requirements.

Regards,
Vivek

0 user5579632 over 7 years ago in reply to Vivek Dham

Prodigy 90 points

Hello Vivek

Ok, copy that.

But we want to know how much the rx sensitivity in your device AWR1642 EVM (AWR1642BOOST ).

Do you give us a range?

Or according your experience, how much the sensitivity in automotive radar?

BR, Karl

0 Vivek Dham over 7 years ago in reply to user5579632

TI__Guru 58035 points

Hello Karl,
Using our 1642BOOST EVM and using the SRR design (dev.ti.com/.../ we have been able to detect a car at 120m.
If you use AWR1243 kind of device with external processor you can detect much longer range object because of larger IF bandwidth and more memory in the processor.

The sensing estimator tool (dev.ti.com/.../) can give you a better idea about estimating the range .

Regards,
Vivek

Sensors

Sensors forum

AWR1642: How much is the minimum RX Sensitivity?