• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 662 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

IWR1443BOOST: Radar Studio: Post Proc a .bin file saved in a previous execution

IWR1642BOOST: Radar Studio: Post Proc a .bin file saved in a previous execution where can i find .log

Kemeng Li
Prodigy 250 points
Part Number: IWR1642BOOST

Hi all.

I am trying to post proc a .bin file that has been saved in a previous execution of Radar Studio. Reading the User Guide it seems possible to Post Proc a .bin file reading the corresponding .log

However I am not able to do so. every time  i load a .bin file, a popup showing that ''Please load a log file before loading a binfile. Alternatively, send the necessary APIs through RadarStudio''.where can i find the .log file.  i have load something familiar such as mmwavelink_logging.txt\mwavelink_log_merge.txt but it stil can’ work and show same popup. How can i do to make it works?

Thanks,

1km

  • 0
    TI__Mastermind 28055 points
    Hi Kemeng,

    When you do a raw data capture with Radar Studio, a .log file will be generated. The log file will be stored in the same folder as the .bin file, and will have the same name. So adc_data.bin will be accompanied by adc_data_log.log. The log file contains chirp data, which is required to process the data properly. Which version of Radar Studio are you using?

    Regards,
    Justin