• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 537 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR1443: set up of multiple receiver gain

Viktorija Cecil
Mastermind 18491 points
Part Number: IWR1443

Is it possible to set up multiple receiver gain (or time variable gain) in one config file for High accuracy visualizer?

Thanks

Viktorija

  • 0
    TI__Mastermind 24955 points
    Viktorija,

    The RX Gain and RF Gain Target are values that are associated with a particular profile on our mmWave devices. Our current SDK allows up to four profiles to be created for one device. You can associate different chirps with different profiles.

    Only one configuration file can be run at a time for the high accuracy visualizer. If you want to change the configuration, you will have to issue a "sensorStop" command or use the Sensor Stop button in the visualizer and then load the desired configuration. Any changes made in real-time would require the the profiles to be coded into the source files and loaded internally instead of through the CLI interface. The CLI interface is provided as a starting point for easy evaluation. Ultimately, the desired profiles used in target deployment would be loaded from memory.

    Regards,
    Kyle