• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 1384 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

AWR1642: mmwave capture demo

AWR1642: mmwave capture demo

Ti_HugeSunfish
Prodigy 200 points
Part Number: AWR1642

1.I've installed mmwave_sdk_02_00_00_04, and I cannot find "capture" folder in the subdirectories as many guys said in other posts.

2.Where can I download the capture demo in the AWR1642BOOST?

3.I read the user guide for mmwave_sdk_02_00_00_04 but I didn't find any article mention about capture demo.

Can you give me the user guide which mention about it step by step?

Also, I didn't see the capture demo (xwr16xx_capture_demo_mss) after I reinstall mmwave_sdk_02_00_00_04 twice.

Thanks

  • 0
    TI__Guru 69960 points
    Hello Mei-Min,
    In SDK 1.2 and 2.0 capture demo is merged with mmw demo, where same demo can be used to enable LVDS streaming from CLI command.
    And if you need to dump ADCBuff to L3 memory as old capture demo was doing then you can use 'packages\ti\drivers\test\mem_capture' test application.


    Regards,
    Jitendra