• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 332 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DCA1000EVM: RAW data capture

DCA1000EVM: RAW data capture

Mitsuharu Iwasaki7
Intellectual 540 points
Part Number: DCA1000EVM

Hello all,

I have some questions about mmWave Studio. I found some settings and local files on PC.

There are 4 settings in Packet 0, 3 settings in Pcaket1 and some 0 byte files in PC.

I cound't find description about it. Please let me know it.

Best Regards.,

Mitsuharu Iwasaki

  • 0
    TI__Mastermind 24955 points
    Mitsuharu,

    It looks like you were trying to upload three pictures as part of your initial post to this thread. The pictures did not load correctly so I cannot see them. And I get the sense that these pictures highlight the issue you are trying to address. Please attempt to upload the pictures again. Without them, I have little information to go off to help with your question.

    Regards,
    Kyle