• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 339 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RTOS/AWR1642BOOST: CAN and CANFD

Madan K Avhad
Expert 1260 points
Part Number: AWR1642BOOST
Other Parts Discussed in Thread: AWR1642

Tool/software: TI-RTOS

Hi E2E Team,

My one of the client using AWR1642BOOST device. They looking for TI's addressing, why they can't use CAN and CANFD together? Also they thinking about MCAN interface.

Kindly address the above.

  • 0
    TI__Mastermind 22155 points
    Madan,

    The CAN and CANFD interface can be used together on AWR1642 from the silicon point of view.
    However, the CANFD lines are available on the AWR1642BOOST and to use the CAN you will need the MMWAVE-DEVPACK. This is because the CAN lines are available on the MMWAVE-DEVPACK.

    Thanks,
    Raghu