IWR1443BOOST: What is "Enable Plots" of Vital Signs Demo?

user5205609

Part Number: IWR1443BOOST
Other Parts Discussed in Thread: DCA1000EVM

Hi,

I use vitalSignsDemo_GUI.exe of lab0002-vital-signs in mmwave_industrial_toolbox_2_5_0.

What is "Enable Plots" check mark?
In vitalSignsLab_xwr1443_DevelopersGuide.pdf,
the picture of this GUI doesn't have "Enable Plots".

When I check off "Enable Plots",
Heart Waveform,Breathing Waveform and ChestDisplacement are stopped.

Regards,
user5205609

over 7 years ago

0 LAXMI KANT TIWARI over 7 years ago

Genius 3345 points

Are you using ES2.0 device. Check on your booster pack if there is a label then it is ES2.0 otherwise it is ES1.0 and for ES1.0 only below or mmwave_industrial_toolbox_2_3_0 works.

0 user5205609 over 7 years ago in reply to LAXMI KANT TIWARI

Intellectual 960 points

Hi,

Thank you very much.

Our IWR1443BOOT has no label of ES2.0,
but when I use it with DCA1000EVM, the mmwave Studio determines it as ES 2.0.
For this reason, I thought it is ES 2.0 until now.

Regards,
user5205609

Sensors

Sensors forum

IWR1443BOOST: What is "Enable Plots" of Vital Signs Demo?