CCS/IWR1443: 1443 drone altimeter project

user5226118

Part Number: IWR1443

Tool/software: Code Composer Studio

1, I get only bin file of drone altimeter from TI Resource ,but I want get project of drone altimeter. what should I do ?

2, I want only to see some code and amend it . so it adapt to my application scenario.

3, I had posted some questions,but no one give answer which I want .cry cry cry ......

4, thank you!

over 7 years ago

0 Nitin Sakhuja over 7 years ago

TI__Mastermind 30405 points

Hello.

It appears that you are discussing the same in the following thread as well:

e2e.ti.com/.../2640624

The Drone Altimiter demo is based on the mmWave SDK 1.0.0.5 mmw Demo for xWR14xx (aka Out of Box Demo) as mentioned in the release notes and setup guide. You can download SDK 1.0 from software-dl.ti.com/.../index_FDS.html and find the source code under C:\ti\mmwave_sdk_01_00_00_05\packages\ti\demo\xwr14xx\mmw.

Thanks
-Nitin

0 user5226118 over 7 years ago in reply to Nitin Sakhuja

Intellectual 435 points

6740.mmw.zip

0 user5226118 over 7 years ago in reply to Nitin Sakhuja

Intellectual 435 points

this is my project . I use code of SDK1.0 in my project . but bin file cant have the same phenomena as other bin which is from TI Resource.

can you help me?

5488.mmw.zip

0 Nitin Sakhuja over 7 years ago in reply to user5226118

TI__Mastermind 30405 points

Hi,

As discussed in the other thread that you have on the same topic, the PC side of the drone altimeter project is basically a GUI which uses the point cloud data coming from the 1443 mmw demo from mmWave SDK 1.0.0.5. As it is based on a very old version of mmWave SDK, the Drone altimeter demo is provided as-is with no support for porting it to a new version of mmWave SDK.

Is there a specific reason you want to use the Drone altimeter GUI? If your objective is to measure the distance to ground, I would recommend using the High Accuracy Range Measurement - 14xx Lab, which is based on the latest mmWave SDK (1.2.0.5) and is updated with newer releases of the SDK.

Thanks

-Nitin

Sensors

Sensors forum

CCS/IWR1443: 1443 drone altimeter project