CCS: TM4C1294NCPDTI3R

Hello Joseph,
TM4C1294NCPDTI3R is being used on AWR1642 EVM for JTAG and UART (flashing) connection. It doesn't require any custom firmware in it to do these tasks. You can connect this chip as it with AWR1642.

For the first question about 'output type from doppler', could you elaborate more?


BR,
Jitendra

Hi and Thanks for your quick reply,
As I see in the eval design that the only connection between the AWR1542 and the MCU is via these 2 signals AR_RS232TX and AR_RS232RX and I'm using the USB PORT to connect to the dopler, my question is, what is the firmware implemented on the MCU to connect these 2 signals to the USB, or in other case, if I need to connect these 2 signals to another MCU, what is the type and specs of these 2 signals ?

Hi Vivek,

one more question, so in case I need to use this dopler in my own design, all what I want is to use the LDO and supply voltage to turn it on, and to communicate with the IC using these 2 UART signals, Im I right ?

Thanks