• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 385 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPT8241: Can I access quads or sub-frames?

Jongho Lee
Prodigy 190 points
Part Number: OPT8241
Other Parts Discussed in Thread: OPT9221

Hi,

I know one sub-frame is the most basic unit to extract depth data and a frame is the averaged value over several sub-frames.

Can I access sub-frame data or even more basic unit, quad data in addition to frame data?

Thanks.

  • 0
    TI__Expert 3800 points
    Hi,

    Accessing sub-frame data is simple. You can set the register, sub_frame_cnt_max = 1. This will make the device give you each sub frame data as a "frame". This heavily increase the output frame rate and would be limited by the data rate.
    Unfortunately, we do not support quad data output from OPT9221.

    Regards,
    Subhash