This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDC7201: Maximum measurement per second by TDC7201

Part Number: TDC7201

Hi there,

Indeed I have this smilar question and would like to know whether there is a simple way to increase the measurement rate... the 10Hz maximum measurement rate is too slow for our applications here... 

Any suggestion is greatly appreciated

Saijun

sjwu77@gmail.com

  • Saijun,

    The GUI shows a minimum trigger refresh time of 100ms only because of the limitations of the USB communication with the GUI software.

    Please let me know the expected TOF for your setup.
  • Dear Bharat,

    Thanks for reply. The expected TOF in my specific application is within 100ns. And here I prefer to increase the measurement rate to kHz range if possible... So is there a way to increase the communcation speed for USB, or is there a way to circumvent the USB communication?

    Thanks again,

    Saijun

    Bharat Aravamudhan said:
    Saijun,

    The GUI shows a minimum trigger refresh time of 100ms only because of the limitations of the USB communication with the GUI software.

    Please let me know the expected TOF for your setup.

  • Saijun,

    We cannot bypass the USB communication if you would like to use the GUI.